ARISS / Satellite Resources

  1. Resources for creating a “Technology/Satellite/ISS” course in local school.

This is designed to be a wide-ranging course in technology, from amateur radio (on which the first part of the course is based) through house wiring, plumbing, carpentry, 3D printing and small engines. This can be taught at the upper-middle school level through high school level.

The textbook that I wrote to create an “introduction to technology” course at high school level. It is used in conjunction with a formal Technician License manual, such as the one by hamradioschool.com https://hamradioschool.com/ You could certainly use it with a Gordon West or other Technician License \course as well.

The course leans toward a school goal of creating a satellite ground station and competing in the ARISS project.

2. Resources for creating a CLUB in a local school:

Invitational handout (geared to an explicitly Christian private school):

This next handout gives an extremely ambitious SCHEDULE for milestones of an upper-school level club. This may have to be adjusted for your particular situation!

This handout helps students learn how to SOLDER and to create their own computer-controlled rotator controller. (This is using a printed circuit board I designed; the GERBERS for this board are given in a github location cited below.)

Example of an “agenda” for a fast-paced club meeting:

3. Resources for building a modest amateur radio satellite ground station:

ARTICLES

TECHNICAL REPOSITORIES

https://github.com/docvacuumtubes/ElevationRotatorVersion2 Github repository with information on building the linear-actuator based Elevation Rotator, using 3-D printed gears.

https://github.com/docvacuumtubes/K3NG-based-Arduino-Nano-Computer-Controllable-Rotator-Controller Github repository with information on creating printed circuit board for an Arduino Nano-based rotator controller (robotic control) — based on code written by K3NG Anthony Good. I have a simplified version of the code that I use in my antenna controllers locally.

https://github.com/docvacuumtubes/Sequencer Useful if you have an older ICOM 820H, this project is able to provide power level control (via ALC voltages) to the IC-820H, and also can provide sequencing of RF power appearance to protect preamplifiers if used.

Also see the information in the Introduction To Technology textbook referenced above.